Most people call a handyman first when a light fixture stops working or an outlet goes dead. That is understandable, but the line between handyman work and electrical work is drawn at the panel, the wiring, and anything that has to meet code. A loose wire at a fixture can be a simple fix. That same loose wire feeding a circuit that also runs a refrigerator and a dishwasher is a different problem, and the right person to diagnose it is an electrician, not a generalist with a screwdriver.
We handle electrical work throughout Wilmette, from single-circuit repairs to full panel replacements and whole-home rewiring. Whether the caller is a homeowner dealing with a fault that keeps coming back or a property manager scheduling work between tenants, the process is the same: describe what you are seeing, and we scope the job on the call before anything is booked. We are available daily from 9:00 AM to 8:00 PM.
An inspection is not just a box to check before a sale. Wilmette carries a significant share of older residential properties, and homes that have not had a thorough electrical review in years can have protection gaps that are invisible until something goes wrong. We check the panel, confirm GFCI and AFCI coverage throughout the home, review grounding and bonding, assess the wiring type and condition, and document what we find. The findings come with a plain explanation of what needs attention and what can wait.
Older homes often carry knob-and-tube wiring, aluminum branch circuits, or a combination of both. Neither is automatically an emergency, but both have limits that matter when a homeowner is adding circuits, finishing a basement, or putting the property on the market. Whole-home rewiring replaces the branch circuit wiring from the panel out. Partial rewiring addresses specific areas or circuits where the existing wiring cannot safely carry the intended load. The scope is determined by what is actually in the walls, not by a default package.
Aluminum-wiring remediation is a related job. Aluminum branch circuit wiring requires specific fittings and connection methods at every device and panel lug. Treating it the same as copper wiring creates a real fire risk at connection points, and we address each one correctly rather than skipping the detail work.
An intermittent fault is the most frustrating kind because it does not show up on demand. A breaker that trips once a week, a light that flickers only under certain loads, an outlet that works sometimes and not others. These symptoms point to something real: a loose connection, a failing breaker, a circuit carrying more than it was designed for, or an arc-fault condition that only appears when the load is high. We trace the circuit to the source rather than replacing the most obvious part and hoping the symptom disappears.
A load calculation tells us whether the existing service capacity is the problem or whether a breaker swap will handle it. When the panel is genuinely undersized for the loads it carries, a service upgrade involves replacing the panel, updating the service entrance if needed, and fitting arc-fault and ground-fault breakers where current code requires them. EV charger circuits, induction ranges, and home office equipment all push older 100-amp services past their limits. A properly sized upgrade gives the home room to carry what it actually draws.
Subpanel installation is an option where a garage, workshop, or addition needs its own distribution point. Recessed and LED lighting retrofits, dedicated circuits for large appliances, and EV charger circuit installation all fall within the same range of work. We handle the full electrical side of each job, from the panel out to the device.
The price is confirmed on the call, before anything is scheduled. We ask about the job, what you are seeing, where it is happening in the home, and what has already been checked. That conversation lets us scope the work and give you a rate that reflects what the job actually involves.
What changes a quote is what the job turns out to require once the work is underway. The fault location matters. A loose connection at an accessible fixture is a different job from the same fault buried in a junction box inside a finished wall. Whether the existing circuit can carry the change, whether the panel has the capacity to support a new load, and whether permit-required inspections apply all factor into the final scope.
A breaker that keeps tripping is a warning worth heeding, and getting a price for the diagnosis costs nothing more than a phone call. Ask what it covers and you get a straight answer. The parts people usually ask about are covered on the full list of electrical services.
Not every electrical problem sits on the customer's side of the meter. The utility is responsible for the service entrance up to the meter itself. Everything from the meter into the home is the homeowner's responsibility. When a fault is hard to locate, part of the diagnostic process is determining which side of that line it sits on.
If the fault traces back to the utility's equipment, a meter that is failing, a service drop with a damaged connection, or a problem at the transformer, we let you know what we found and what the next step is. That means contacting the utility directly and describing the specific symptoms. We document what we found on our side so that conversation is as clear as possible.
Where the fault is on the customer's side, we address it as part of the same visit where possible, or schedule the follow-up with a clear scope of what the repair involves.
Scheduling a service call is simple. Call during any day from 9:00 AM to 8:00 PM, describe the situation, and we confirm what the schedule allows and what the job involves before hanging up. Weekend calls are handled the same way as weekday calls.
When a problem will not keep, we take short-notice work where the schedule allows. A sparking outlet, a panel that is tripping repeatedly, or a total loss of power to part of the home are situations that need attention promptly, and we treat them that way.
For tenants or businesses that cannot shut down for a full day, the approach is to isolate the affected circuit rather than the whole panel where the job allows it. We talk through the scope on the call so the occupant or property manager knows what to expect before the visit starts.
Some jobs require isolating only one circuit. Replacing an outlet, adding a GFCI device, or running a new circuit from a panel with available capacity can often be done with a single breaker off and everything else in the home running normally. A person working from home can usually stay at their desk through that kind of work.
Jobs that touch the main panel directly require shutting the panel down for part of the visit. A full panel replacement means the power is off for the duration of the swap, which takes several hours. A service upgrade that includes service-entrance work may require coordinating with the utility for a brief disconnect. We walk through the expected outage window on the call so the homeowner or business can plan around it.
We show up, and we keep you posted until the job is done. That includes letting you know when the power is coming back on and confirming the system is running correctly before we leave.
We serve Wilmette and the neighboring communities throughout Cook County. That includes Kenilworth, Winnetka, Evanston, Northfield, and Skokie, along with the wider north suburban corridor. If your property falls in any of those areas, the same process applies: call, describe the job, and we confirm what the schedule allows.
If you are not sure whether your address is within our service area, the fastest way to find out is to call.
We map the panel as part of the diagnostic process, testing each breaker to identify what it controls. That information is documented and can be used to label the panel correctly. Unlabeled panels slow down troubleshooting and make future work more difficult, so addressing it during a visit is worth doing.
Yes. We can prioritize the areas of greatest concern and return for subsequent phases as the schedule and budget allow. Each phase is scoped and priced separately so you know exactly what each visit covers before it is scheduled.
An electric gate requires a dedicated circuit run to the gate location, sized for the gate operator's draw. If the gate is at a distance from the panel, the run may need to go underground. We scope the circuit and the installation method on the call.
Older properties in this area often carry knob-and-tube wiring, aluminum branch circuits, or panels that were sized for a different era. We assess what is actually in the home before recommending any work, explain what the wiring type means for the job at hand, and address each connection point correctly rather than treating it as a cosmetic issue. The scope is based on what the home has, not on a default package.
Yes. If you manage multiple properties and need work done across several of them, call and describe what each job involves. We schedule them based on what the calendar allows and scope each job separately.
For most panel and circuit work, yes. Jobs that touch only one circuit require isolating that circuit while the rest of the home runs normally. A full panel replacement requires shutting the panel down for the duration of the swap. We walk through the expected outage window during the scheduling call so you can plan around it, and we confirm the system is running correctly before we leave.
Vacant properties are straightforward to schedule because access does not need to work around an occupant's routine. We confirm access arrangements on the call, including whether a key needs to be provided or whether someone will meet us at the property.
We work on single-family homes, multi-unit residential buildings, and commercial properties throughout Wilmette. The scoping and quoting process is the same regardless of property type: describe the job on the call and we confirm what the work involves and what it costs before scheduling anything.
You do not need to know the technical cause before you call. Describe what you are seeing, when it started, and whether it affects one area or the whole property. We ask the follow-up questions needed to scope the job and explain what the likely cause is before anything is scheduled.
Describing what you are seeing is enough. Whether it is a breaker that will not stay on, a room with no power, or a fixture that has been behaving strangely for weeks, we take the details on the call and work out what the job involves from there.
Call Electrical Company at (224) 592-9789 any day from 9:00 AM to 8:00 PM.
Just as close, we take electrical work in: Morton Grove, Glenview, Niles, Northbrook. You can browse our full list of areas.
Electrical work in Wilmette covers everything from a single dead outlet to a full panel replacement, and the right service depends on what the system is actually doing. We handle the everyday repairs and the larger upgrade work, and we scope every job on the call before anything is scheduled. The table below lays out what each service covers, who it fits, and what is worth knowing before you call.
| Electrical Service | What's Included | When You Need It | Worth Knowing |
|---|---|---|---|
| Lighting Installation | Recessed and LED lighting, Under-cabinet and accent lighting, Exterior and security lighting, Permit work for renovation lighting | Homeowners remodeling, adding outdoor lighting, or upgrading to energy-efficient fixtures | Outdoor fixtures in the Chicago area need weatherproof installation and proper circuit protection to hold up through Illinois winters. |
| Electrical Panel & Service UpgradesMost Popular | Load calculation and panel sizing, Panel replacement and breaker updates, Service entrance and meter upgrades, Arc-fault and ground-fault protection | Older homes adding EV charging, induction appliances, or home office loads that push a 100-amp service past its limit | Permit-required panel work is part of the job. We handle the filing and the inspection process from start to finish so the upgrade is on record. |
| EV Charger Installation | Dedicated 240-volt circuit run, Panel capacity confirmation, Hardwired or outlet-based charger connection, Permit filing where required | Wilmette homeowners adding a Level 2 charger to a garage or parking area | We scope the panel capacity and circuit run on the call so you know what the full installation involves before anything is scheduled. |
Call (224) 592-9789 to get a price on any electrical job in Wilmette or the surrounding area. We are open daily from 9:00 AM to 8:00 PM.
(224) 592-9789